文章摘要
陈 超,贾瑞锦,李炎璐,吴雷明,宋振鑫,赵从明,吴 坚.条纹锯鮨精子超微结构及其入卵过程的电镜观察.渔业科学进展,2014,35(5):97-103
条纹锯鮨精子超微结构及其入卵过程的电镜观察
Observations on the Spermatozoon, Egg and Fertilization Process of Centropristis striata Using the Electronic Microscopic Technique
投稿时间:2013-07-06  修订日期:2013-09-11
DOI:10.11758/yykxjz.20140514
中文关键词: 条纹锯鮨  精子  卵子  精子入卵  电镜
英文关键词: Centropristis striata  Spermatozoon  Eggs  Fertilization process  Electron microscopy
基金项目:科技部国际合作项目(2012DFA30360)和天津市农委/三院三校项目(201004070)项目共同资助
作者单位
陈 超 农业部海洋渔业可持续发展重点实验室 中国水产科学研究院黄海水产研究所 青岛 266071 
贾瑞锦 农业部海洋渔业可持续发展重点实验室 中国水产科学研究院黄海水产研究所 青岛 266071 上海海洋大学水产与生命学院 上海 201306 
李炎璐 农业部海洋渔业可持续发展重点实验室 中国水产科学研究院黄海水产研究所 青岛 266071 
吴雷明 农业部海洋渔业可持续发展重点实验室 中国水产科学研究院黄海水产研究所 青岛 266071 上海海洋大学水产与生命学院 上海 201306 
宋振鑫 农业部海洋渔业可持续发展重点实验室 中国水产科学研究院黄海水产研究所 青岛 266071 
赵从明 天津立达海水资源开发有限公司 天津 300050 
吴 坚 浙江海生源生物科技有限公司 台州 318000 
摘要点击次数: 11046
全文下载次数: 8659
中文摘要:
      采用扫描和透射电镜技术对自然成熟的条纹锯鮨精子、卵子及精子入卵过程进行观察。观察结果显示,其精子由头部、中段和尾部三部分组成:头部主要由细胞核构成,无顶体结构;中段由线粒体、中心粒复合体(近端中心粒和基体)、袖套组成;尾部主要由轴丝组成,外部包裹质膜,轴丝为典型的“9+2”结构。卵子表面分布纵横交错的网纹,均匀分布着大小不一的微小孔,在卵壳的动物极精孔区的中央有一个受精孔。在授精后10 s即可见到精子通过受精孔进入卵子,刺激卵子发生形态变化封闭受精孔,阻止其他精子入卵,60 s可见受精孔完全封闭。
英文摘要:
      To explore the fertilization mechanism of Centropristis striata and improve the fertilization rate, the ultrastructure of spermatozoon and egg and the fertilization process were observed using the scanning electron microscope (SEM) and transmission electron microscope (TEM). The results showed that the sperm of C. striata was mainly composed of the following three parts: 1) head; mainly consisted with nucleus and without the acrosomal structure; 2) midpiece; consisted with mitochondrion, centriolar complex (including proximal centriole and matrix) and sleeve structure; and 3) tail; consisted with axoneme that is surrounded by plasma membrane. The axoneme of C. striata was consistent with the typical “9+2” structure in most fish. The eggs were spherical, colorless, and transparent with the diameter at (0.950±0.039) mm, which belonged to pelagic eggs. A big grain of oil ball (0.182 ± 0.011mm in diameter) was observed in the egg. Overlapping curves were observed on the surface of the eggs, on which the tiny holes with different sizes (0.246±0.103 µm) were evenly distributed. A completely-opened fertilization hole was in the central part of the funneled area at the animal pole. The shell of the egg included plasma membrane, vitelline membrane and shell membrane. The shell was filled with cytoplasm. The fertilization process of C. striata was short. The sperm penetrated into the egg through the micropyle in 10 seconds after insemination. The morphological feature of the fertilized egg changed after that, and the fertilization cone and fertilization plug were observed. Finally, about 60 s after insemination, the fertilization hole closed to prevent the penetration of other sperms. This study may provide theoretical foundation to improve the fertilization rate of C. striata artificial breeding.
附件
查看全文   查看/发表评论  下载PDF阅读器
关闭